If you are using an Android device, then please follow these instructions. If you are using an Apple iOS device, then please read the instructions further down this page.
Please ensure the following latest software versions are downloaded on your Android phone and/or tablet:
If you are mirroring onto a Windows Laptop, please download
- Google Chrome
- Chrome app “Vysor”
- For this to work, it requires Universal ADB Drivers to be installed
- Full instructions and videos for “Vysor” can be found here
If you are mirroring onto an Apple Laptop, please download
- Google Chrome
- Chrome app “Vysor”
- Full instructions and videos for “Vysor” can be found here
1. Setup the TV at a comfortable height to mimic the screen as if it was on the arthroscopic stack, and the laptop close enough to reach through a HDMI cable.
2. [LAPTOP] Connect a HDMI cable from your laptop to your TV (make note of which HDMI input is used).
3. [TV] Turn TV on and select the same HDMI input from above step.
4. [TV] The TV display should be same as the laptop. If not, then please look into your operating systems multiple display settings.
5. Place the AR-throscopy Kit or Simulator Box on a table that is at a comfortable height to perform simulated arthroscopy.
6. Make sure the AR markers are not in a shadow and place the phone in a position that is stable and clearly viewing the AR markers. We would strongly advise purchasing a phone stand for this purpose.
7. [ANDROID PHONE] Go to Settings > About Phone > Software Info > Build Number (press 7 times to enter “Developer Mode”).
8. [ANDROID PHONE] Go to Settings > “Developer Options” > Turn USB Debugging “On”.
9. [ANDROID PHONE] Increase screen brightness to the maximum setting. Go to Settings > Display > Brightness.
10. [ANDROID PHONE] Connect phone with a data cable with your laptop.
11. [ANDROID PHONE] Select to allow access to device data.
12. [ANDROID PHONE] From top menu – select USB options > “Use USB for transferring images (PTP connection)”.
13. [LAPTOP] Select “no” to any prompts to transfer photos or videos from phone.
14. [LAPTOP] Open “Google Chrome”.
15. [LAPTOP] Load “Vysor” from Chrome Apps.
16. [LAPTOP] Wait for device to be found, or click “Find Device”.
17. [LAPTOP] Your “Android Phone Name” will appear. Click “View”.
18. [LAPTOP] A new window showing your phone screen will appear.
19. [LAPTOP] Wait until advert appears after 30 seconds and press “X” on top LEFT of window.
20. [LAPTOP] The window will continue to show what is on the phone display.
21. [PHONE] Tap AR-throscopy app.
22. You are ready to go!
